Table of Contents
Advertisement
SuperServer 6029U-T Series User's Manual
Figure 3-14. Expansion and Riser Cards—Rear View
Installing PCI Expansion Cards
1. Power down the system and remove the top chassis cover.
2. Remove the riser card bracket, pictured above. On the rear of the chassis, each
bracket is secured by a small black plastic flip-switch with an arrow on it. Flip open the
appropriate switch to release the bracket, then pull the bracket out of the chassis.
3. Insert the expansion card(s) into the riser card slot(s) while aligning the rear PCI shield.
Add the screw to secure the PCI shield.
Ultra Riser Bracket
WIO Riser Bracket
52
Advertisement
Table of Contents
