Making A Phone Call; Receiving A Call - Accept (And End); Mute (Or Unmute) Microphone During Call; Transfer Ongoing Call Between Handset And Vehicle - Uconnect 5.0 Owner's Manual Supplement

Making A Phone Call

1. Push the PHONE button on the steering wheel.
2. After the BEEP, say "dial" (or "call" a full name or
phone number).
Receiving A Call — Accept (And End)
1. When an incoming call rings or is announced on
Uconnect®, push the PHONE button on the faceplate.
2. To end a call, push the PHONE button on steering
wheel or the PHONE button on the faceplate.

Mute (Or Unmute) Microphone During Call

1. During a call, push the VOICE COMMAND button on
the steering wheel.
2. After the BEEP, say "mute" (or "mute off.")
Transfer Ongoing Call Between Handset And
Vehicle
1. During a call, push the VOICE COMMAND button on
the steering wheel.
2. After the BEEP, say "transfer call."

Changing The Volume

1. Start a dialogue by pushing the PHONE button on the
faceplate, then adjust the volume during a normal call.
2. Use the radio ON/VOLUME rotary knob to adjust the
volume to a comfortable level while the Uconnect®
system is speaking. Please note the volume setting for
Uconnect® phone is different than the audio system
volume setting.
Uconnect® PHONE 25
4