Kongsberg Seatex AIS 100 Instruction Manual page 96

Seatex AIS 100 Instruction Manual, rev. 5
=== Serial Ports === P191
External ports
PILOT :38400
PI :38400
LongRange :4800
RTCM :4800
SENSOR-1 :4800
SENSOR-2 :4800
SENSOR-3 :4800
=== Netw.Settings == P192
External ports
IP-adr :10.0.21.53
SubNet :256.256.256.256
Gateway :10.0.21.1
MAC MS :000.005.190
MAC LS :000.000.244
Network & Ports. The serial port baud rate must
be set up according to external instrumentation.
The Serial Ports page displays the baud rate for
all serial ports. The sensor interfaces comply with
the NMEA 183.
Setup procedure:
Change the baud rates accordingly.
Local Area Network. A network administrator
will provide the appropriate settings.
The Network page displays the network settings.
Setup procedure:
Change the network setting accordingly.
MAC xx: the processing cards MAC address.
Note!
If a local PC is used outside a network server, use
a crossed UTP cable to connect LAN. Set up the
PC accordingly.
88
Software setup procedure