Kongsberg Seatex AIS 100 Instruction Manual page 95

Seatex AIS 100 Instruction Manual, rev. 5
=== Static Data ===== P14
AIS Transceiver
Length A:30
Length B:10
Length C:7
Length D:7
========================
1234567890*< >
=== VHF Link ======== P17
Ais Transceiver
ChnA :2087
ChnB :2088
TxPower :HIGH
BW A :Default
BW B :Default
Transmitter :TxON
2/3
 
 
Static Data External GPS/GNSS Antenna. If the
vessel's own GPS/GNSS antenna is used as input
to the AIS 100 mobile station, the same
parameters are necessary. No vertical
measurements are used.
Setup procedure:
Enter: A, B, C & D.
A
B
C D
VHF link . The AIS 100 Mobile station
transmitting power is normally set to High. The
channel management is normally atomised via
base stations, so the channel selection ChnA,
ChnB and the bandwidth BW A and BW B, shall
not be altered.
The VHF link page describes the current VHF
settings.
Setup procedure, check that:
ChnA=2087, ChnB=2088
BW A=Default, BW B=Default
TxPower is set to High.
High=12W, Low=2W
Transmitter=TxON
87
Software setup procedure