Kongsberg Seatex AIS 100 Instruction Manual page 94

Seatex AIS 100 Instruction Manual, rev. 5
=== Static Data ===== P14
Own Ship
Name :ANNE BERIT
Call :TA164GH
Mmsi :14395769235
Imo :10978974453
Type :51
Keel :12
   
=== Static Data ===== P14
AIS Transceiver
Length A:30
Length B:10
Length C:7
Length D:7
========================
1234567890*< >
 
 
Static Data is divided into three groups.
Static Data Own Ship is used for entering the
1/3
vessel's own static data, i.e. ship data that does not
change from one voyage to another
The parameters necessary to customise are:
Setup procedure:
Name: The vessel name.
Call:
MMSI: The Maritime Mobile Signal Identifier
number.
IMO: The vessel IMO number.
Type: Type of vessel.
Keel:
metres.
Static Data Internal GPS antenna . It is
2/3
necessary to specify the exact position of the AIS
100's internal GPS antenna. No vertical
measurements are used.
Setup procedure:
Enter: A, B, C & D.
The vessel call sign.
Height over keel. Total height of vessel in
A
B
C D
86
Software setup procedure