Kongsberg Seatex AIS 100 Instruction Manual page 90

Seatex AIS 100 Instruction Manual, rev. 5
Field
MMSI Message ID identifying this sentence
<nnnn> MMSI number
All fields are required and used.
IMO number
To request the current IMO number from the AIS mobile station, use
the command:
$PSTXQ,IMO*<FCS><CR><LF>
The AIS mobile station response message has the format:
$PSTXR,IMO,<nnnn>*<FCS><CR><LF>
To set or change the IMO number, use the command:
$PSTXS,IMO,<nnnn>*<FCS><CR><LF>
Field
IMO Message ID identifying this sentence
<nnnn> IMO number
All fields are required and used.
Serial port communication parameters
To request the current communication parameters of the serial ports,
and to retrieve all available serial ports, use the command:
$PSTXQ,PORT*<FCS><CR><LF>
The AIS mobile station response message has the format (one
message per port):
$PSTXR,PORT,CCCC,<bbbb>,<p>,<d>,<s>*<FCS><CR><LF>
To set or change the communication parameters, use the command:
$PSTXS,PORT,CCCC,<bbbb>,<p>,<d>,<s>*<FCS><CR><LF>
Description
Description
82
External interfaces
Range
NA
0 to 1073741823
Range
NA
0 to 1073741823