Usb Port (Optional); Controlling The Visualiser From A Computer - Genee 6100 Manual

part of the image. Press the " " button to scroll the image up to
display the lower part of the image.

USB PORT (Optional)

The USB port can be used to transfer still images from the visualiser
to a computer. No additional computer hardware is required. In this
way, the visualiser can be used as a 3-D scanner for your computer.
Connect the visualiser to your computer with the supplied USB cable.
The Visualiser Software is available on the supplied CD-ROM.

CONTROLLING THE VISUALISER FROM A COMPUTER

You can control the visualiser from a computer connected with a
RS232 connector.
A. Connect the computer and the visualiser with the computer
RS-232 cable (9-pin to 9-pin).
B. Select [Start] -> [Program] -> [VideoCap] -> "VideoCapx.xx" (x.xx
is software's version) to open the software.
C. Click "Control Panel" under "Capture".
D. Select the COM port COM1 or COM2，and you can control the
visualiser by clicking the buttons on the menu.
：
Toolbar
Control : Control the visualiser by a computer throught RS232
cable.
Capture one frame
it to the desired path.
Full Screen
click to exit.
Start Capture
Stop Capture
: Capture the current preview image and save
: Full screen display the preview content, left double
: Start to video capture
: Stop video capture
19