Light; Adjusting Image Size; Working With Negatives - Genee 6100 Manual

LIGHT

The arm lights are on when the power is on. Each time you press the
"LAMP" buttons, the lighting changes as below.
The arm lights turn on
The back light turns on
All the lights turn off

ADJUSTING IMAGE SIZE

In order to reduce or enlarge the image size displayed on the screen,
press the " T " or " " button.
+
W

WORKING WITH NEGATIVES

The visualiser is automatically set to display normal materials on the
screen when the power is on. To display negatives, turn on the
backlight by pressing the "LAMP" key, and then press the "Neg"
button to display the film negatives. Press the "Neg" button again to
display normal materials in the color mode.
14