Button Instruction - Genee 6100 Manual

Far/Near (Focus far or near)
Split (Image Split function)
Ppw (Control the projector On/Standby)
Pin (Projector input signal selection)
(Move the image up/down) (Optional)
/
CCD/PC1/PC2 (CCD/RGB input signal selection)
VIDEO (VIDEO input signal selection)
LAMP (Control the arm lights and back light)
AUTO (To auto adjust white balance and auto focus)
(Increase and decrease the magnification)
+ T/
W
Remarks: Frz, Title, D./S. and Split functions are only available on
PROJECTOR OUT.

BUTTON INSTRUCTION

Button function instruction sheet
Button Instruction Indicator Instruction
CCD/PC1/PC2 S-Video/Video
POWER
Press and Hold Two Seconds
to Power Off Visualizer
4
Fold/Setup Instruction
Auto Adjust Color
Brightness and Focus