Title Function; Image Save And Recall; Infrared Remote Control; Image Scrolling (Optional) - Genee 6100 Manual

Static mode.
Note: This function is not available on S-Video and Video
output.

TITLE FUNCTION

Press the "Title" button once, the image split into two parts, the upper
1/8 part of the image will freeze and stay on top 1/8 of the screen.
Press "Title" button again to exit the Title mode.
Note: This function is not available on S-Video and Video
output.

IMAGE SAVE AND RECALL

Press the "SAVE" button once to save one captured images, it can
th
save up to 7 images. After 7 images are saved, the 8 image will
st st
replace the previous 1 image and will become the new 1 saved
image. (On the remote control)
Press the "RECALL" button once to display the saved images, then
press the numerical button to show the corresponding image. For
example: Press "2" to display the second image. At this status, the
function under each numeric key is not available. Press "RECALL"
again to exit this mode. (On the remote control)

INFRARED REMOTE CONTROL

The visualiser's remote control can control the camera from different
angels. Please note that an infrared remote control can only be used
up to a certain distance to the unit. Objects situated between the
visualiser and the infrared remote control and a weak battery may
interfere with the reception.
On the left side of the visualiser stage, there is a built-in remote
control storage compartment where you can store the remote control
when you not use it.

IMAGE SCROLLING (Optional)

Press the " " button to scroll the image down to display the upper
18