Canon PIXMA MG5220 Service Manual page 10

Paper jam. [1300]
Paper jam in the [1303]
rear guide.
Paper jam in the [1304]
under guide.
Ink may have [1600]
run out.
Ink tank not [1660]
installed.
Print head not [1401]
installed, or not
properly
installed.
Faulty print
head ID.
Print head [1403]
temperature
sensor error.
Faulty [1405]
EEPROM data
of the print
head.
Inner cover
[1841],
error
[1846]
--- The paper is
jammed. Clear the
---
paper and press
[OK].
---
U041 The ink may have
run out. Replacing
the ink tank is
recommended.
U043 The following ink
tank cannot be
recognized.
(Applicable ink tank
icon)
U051 Print head is not
installed. Install the
print head.
U052 The type of print
head is incorrect.
Install the correct
print head.
--- Inner cover is open.
close the inner cover
and press [OK].
for plain paper only.
Remove the jammed
paper and press the OK
button.
For paper jam in the rear
guide, confirm that the
rear guide is not
dislocated.
Replace the applicable
ink tank, or press the OK
button to clear the error
without ink tank
replacement. When the
error is cleared by
pressing the OK button,
ink may run out during
printing.
Install the applicable ink
tank(s) properly, and
confirm that the LED's of
all the ink tanks light red.
Install the print head
properly.
If the error is not cleared,
confirm that the print
head contact pins of the
carriage are not bent.
Re-set the print head. If
the error is not cleared,
the print head may be
defective. Replace the
print head. If the error is
not cleared, confirm that
the print head contact
pins of the carriage are
not bent.
Close the inner cover,
and press the OK button.
If the error is not cleared,
examine that the inner
cover sensor is properly
installed.
6 / 62
- Pick-up arm unit
- ASF unit
- Pressure roller ass'y
- Cassette unit
- Rear guide unit
- Spur unit
- Ink tank
- Carriage unit
- Print head
- Carriage unit
- Print head
- Carriage unit
- Spur unit
- Inner cover unit