Canon PIXMA MG5220 Service Manual page 50

(Clear Ink counter resetting
Counter)
12 EEPROM EEPROM initialization
Clear
13 Panel Check Button and LCD test
14 Clear S/N Serial number resetting
(to zero)
15 Set Destination Destination settings
16 N/A
17 LF / EJECT LF / Eject correction
Correction value setting
18 Auto LF / EJ Automatic LF / Eject
correction
19 Left Margin Left margin correction
Correction value setting
20 Ink Absorber Ink absorber counter
Counter setting
21 Wetting Liquid Wetting liquid counter
Counter setting
22 Panel Rank Capacitive sensor
sensitivity setting
23 Flatbed Individual scanner
Scanner adjustment
The following items are NOT initialized, and the shipment
arrival flag is not on:
- USB serial number
- Destination settings
- Record of ink absorber counter resetting and setting
- Disc label print position correction value
- LF / Eject correction values
- Left margin correction value
- Production site E-MIP correction value and enabling of it
- Endurance correction value and enabling of it
- Record of disabling the function to detect the remaining ink
amount
- Ink absorber counter value (ink amount in the ink absorber)
See "(4) Button and LCD
The machine serial number is reset to "000000000."
Not used in regular repair.
Select the destination, and click Set.
ASA, AUS, BRA, CHN, CND, EMB, EUR, JPN, KOR,
LTN, TWN, USA
See "(3) LF / Eject correction" below.
Set the correction value based on the printed pattern (7. LF /
EJECT correction pattern print).
Not used.
Not used.
See "(5) Ink absorber counter
Not used.
Not used.
Not used.
46 / 62
test" below.
setting" below.