Turn On The Lcr Meter - Keysight Technologies U1731C Quick Start Manual

Turn On the LCR Meter

To power ON your LCR meter, press the power-on
button once.
Power-on button
To avoid damage to the device, do not exceed the
WARNING
input limit. Do not apply voltage to the input
terminals. Discharge the capacitor before testing.
Your LCR meter is capable of remote data logging.
NOTE
To use this feature, you will need an IR-USB cable
(U5481A, purchased separately) and the Keysight
GUI Data Logger Software (downloadable from
www.keysight.com/find/hhTechLib).
Keysight U1731C/U1732C/U1733C Quick Start Guide 5