Table of Contents
Advertisement
FREEZE-FRAME
The VCP lets you stop ("freeze") the tape to
view a single frame. To use freeze-frame,
during normal play, press
panel. During freeze-frame, there is no
sound and the picture quality is not as good
as during normal playback.
After about 5 minutes, the VCP
automatically stops. To stop the tape sooner,
press
. To resume normal playback,
STOP
press
.
PLAY
Note: Tapes recorded at the EP speed
provide the best picture during freeze-frame.
AUTO REPEAT
PLAYBACK
You can set the VCP to continuously play,
rewind, then repeat a tape. Follow these
steps to activate this function.
1. Press
. The following appears on
MENU
the TV screen.
2. Press
SELECT
AUTO REPEAT
3. Repeatedly press
to
AUTO REPEAT
4. Press
to exit.
MENU
on the front
STILL
or
to highlight
.
so
ON
appears next
OK
.
Note: If you do not press any key for a few
minutes, the VCP automatically exits the
menu mode.
To disable the auto repeat playback, simply
repeat steps 1–4, selecting
To set the VCP for auto repeat playback,
before or during normal playback, press
so the A-REPEAT indicator lights.
A-REPEAT
The tape automatically rewinds when it
reaches the end, then begins to play again.
To end auto-repeat, press
A-REPEAT indicator turns off.
ADJUSTING TRACKING
When tape playback begins on your VCP, its
built-in tracking control automatically aligns
the playback heads to the recorded track.
A-REPEAT
DISPLAY
OK
For poor quality or worn tapes, you might
need to further adjust the VCP's tracking. To
adjust the picture tracking manually, hold
down
TRACKING
picture improves.
at Step 3.
OFF
so the
A-REPEAT
TV/VCP
MENU
TRACKING
SELECT
or
until the
17
Advertisement
Table of Contents
