Hardware Installation Manual
Item
1
2
3
4
5
To connect the device to the power supply using the power adapter:
1.
Insert the relevant AC plug into the housing power adapter:
a.
Insert the top part of the plug into the upper part of the housing slot (1).
b.
Press down on the bottom part of the plug until a "click" sound is heard, indicating
that the plug is securely inserted in the housing slot. To remove the plug, push
and slide down the OPEN plug release lever (3).
2.
Insert the DC plug (5) located at the end of the power cord (4) of the power adapter
into the device's power socket located on the rear panel.
Media Gateway & E-SBC
Table 5-4: Power Adapter with Interchangeable Plugs
Plug slot
Plug lock
Plug release lever
DC power cord
DC power plug
Figure 5-16: Inserting Plug into Power Adapter
Description
35
5. Cabling the Device
Mediant 500L