Inserting / Replacing Batteries
Remove the battery compartment lid.
Insert new batteries. Pay attention to the polarity.
Close the battery compartment.
The batteries should be replaced, when the battery voltage is too low.
Batteries should be removed if the device will not be used for a long time (danger of corrosion).
NOTE:
We reccomend to use LI /IRON Batteries (energy-plus battery).
Approximate time of continious operation*:
•
LI / IRON (4 000 mAh) - about 5 hours
•
NiMh (2 000 mAh) - about 3.5 hours
*in condition of operation under environment temperature 20°C and also average values of instrument
settings (brightness, contrast and so on).
COSMO 150
9
VIDEO
Need help?
Do you have a question about the COSMO 150 Video and is the answer not in the manual?
Questions and answers