Ada COSMO 150 Video Operating Manual page 23

COSMO 150
23
VIDEO
Staking out function
This function allows to set two different distances (a and b) and mark definite measured distance.
Press button until the symbol is displayed.
With buttons and you can adjust the values to suit the desired stacking out distance. After the
stacking out value is set, press button to confirm it. Press to cancel this setting.
After the stacking out value "a" is confirmed, value "b" is flashing on the display. The process of addi-
tion value "b" is the same as for value "a". Press button when the value is set.
Press button to cancel value "b"and return to the value "a". Press button to start measurement.
Summary line shows the distance to the set value and the direction of the movement.
Additional information: distance from the reference point (surface) and the distance from the nearest
set point to the reference point (surface).