Time Counter - RCA ProV800C User Manual

Playback
Playback Features

Time Counter

The time-counter display shows the actual time elapsed when playing back a segment
of tape. The memory-stop feature helps locate a certain point on the tape. When
memory stop is on, the tape will stop automatically during rewind or fast forward
when the time counter reaches M 0:00:00.
To Use the Memory-Stop Feature
1. Place the POWER switch in VCR,
locate the place on the tape you want
to return to, and press COUNTER R/M
for more than two seconds to reset the
counter to 0:00:00.
M
0:00:00
Time Counter With
Memory Stop Turned On
70
(Continued)
COUNTER R/M (Reset/Memory) Button
POWER Switch in VCR
Thumb Trigger
2. Press COUNTER R/M again to turn on
memory stop. An M appears before
the time counter.
3. Continue to play the tape. When you
want to return to the place you marked,
press the STOP button.
4. Press REW. The tape will rewind to
the time counter reading of M 0:00:00.
5. Press COUNTER R/M to turn off
memory stop. The M disappears.
Note: The time counter does not operate on
blank portions of tape.
STOP Button
REW Button