RCA ProV800C User Manual page 57

Recording
4 4
3 3
6. Press or to highlight Interval
Timer.
Tally
Interval Timer
Rec Time
JLIP ID NO.
6 6
7. Press to start Interval Timer
flashing.
Tally ON
Interval Timer OFF
Rec Time OFF
JLIP ID NO. 0 7
4 4
3 3
8. Press or to select the amount of
time you want the recording delayed.
• Select 15S to delay the recording
for 15 seconds.
• Select 30S to delay the recording
for 30 seconds.
• Select 1min to delay the recording
for one minute.
• Select 5min to delay the recording
for five minutes.
• Select OFF if you do not want the
camcorder to delay recording.
9. Press
10.Press MENU to exit the menu.
ON
OFF
OFF
0 7
11. Press the thumb trigger to start self-
15S
30S
1min
5min
OFF
12.Turn off the interval time when you are
5 5
twice to return to the
recording menu.
the amount of delayed recording time
appear in the viewfinder or on the
LCD monitor.
5min
PAUSE
Self-Timer Indicator in Viewfinder
or on LCD Monitor
timer recording. The camcorder will
start recording after the amount of time
you have set. It will continue
recording until you press the thumb
trigger to stop recording.
Notes: If the tally light is turned on, it
starts flashing. About five seconds before
recording begins, the tally light will start
flashing faster. It will stop flashing when
recording begins.
To stop self-timer recording before it has
started, press the thumb trigger again, and
set the Interval Timer to OFF.
finished by selecting Interval Time
OFF in the Sub Menu.
and
55