Table of Contents
Advertisement
Recording
Tape Positioning
Place POWER switch in VCR and press
STOP.
• Press and quickly release REW or FF to
rewind or fast-forward the tape. Press
STOP to stop the tape.
Quick Review Feature
Press and release EDIT SEARCH – when
the camcorder is in record pause to
review the last few seconds of a
recording. The POWER switch must be
in CAMERA.
The camcorder will play back the last
few seconds of the recording, return the
tape to its previous position, and return to
record pause.
REW and FF (Also EDIT
SEARCH – and +) Buttons
POWER Switch
Camera Edit Feature
The camera edit feature allows you to
position the tape when the camcorder is
in record pause. Place VCR/OFF/
CAMERA switch in CAMERA.
• Press and hold EDIT SEARCH – to
visually search the recorded tape in
reverse.
• Press and hold EDIT SEARCH +
to visually search forward on the
recorded tape.
Release the button to return camcorder to
record pause at that point on the tape.
Press the thumb trigger to start recording
at this point.
31
Advertisement
Table of Contents
