Attach The Adapter/Charger; Adjust Handstrap; Open Lens Cover - RCA ProV800C User Manual

First-Time Operation

2. Attach the adapter/charger.

Since the battery must be charged before it can be used the first time,
attach the adapter/charger to the camcorder.
To AC 100-240V, 50/60 Hz
POWER
Indicator
DC Cable
A. Connect one end of the DC cable to
the DC OUT jack on the
adapter/charger.
B. Connect the other end of the DC
cable to the DC IN jack on the
camcorder as shown above.
3. Adjust the handstrap to fit
your hand.
• Lift the flap on the handstrap and
separate the velcro strip.
• Insert your hand, adjust the strap to
fit snugly, refasten the strap, and
close the flap.
4
Adapter/Charger
DC OUT Jack
DC IN
Jack
C. Plug the adapter/charger's plug into
an operating outlet. The adapter/
charger's POWER indicator will
light
LENS COVER
Control
Handstrap Velcro Strip
(Under Flap)
Handstrap Flap
4. Slide LENS COVER control to

open lens cover.