RCA ProV800C User Manual page 37

Recording
Press the MAN.W.BAL. (Manual White Balance) Button
to Display Indicators in Viewfinder or on LCD Monitor
Auto White Balance
A. Point camcorder at a white, flat
object such as a piece of white
paper.
B. Press and hold MAN.W.BAL .for
at least three seconds.
The MWB indicator will flash
while the camcorder is adjusting
white balance and stop flashing
when it is ready to record.
Note: To change the tint for special
recording, substitute colored paper
for white. The white balance is
adjusted based on the color.
Red paper – deeper green
Blue paper – orange
Yellow paper – deeper purple
MWB
Manual White Balance
Halogen or Tungsten
Light
• Select
outdoors on a sunny day.
• Select
outdoors on a cloudy day.
• Select
halogen or tungsten lighting.
4. To have camcorder automatically
control white balance, repeatedly
press MAN.W.BAL. until no white
balance indicator appears in the
viewfinder or on the LCD monitor
(or place the FULL AUTO/PRESET
switch in PRESET).
Note: Manual white balance does not
operate if Sepia is selected as a program
effect.
Outdoors — Sunny
Outdoors — Cloudy
when recording
when recording
when recording using
35