Table of Contents
Advertisement
Recording
Recording Menu — Date/Time Display
The date and time must be set before it can be displayed and recorded on your
tapes. The clock cell must be installed as shown on the previous page before the
date can be set and recorded.
5 5
Button
MENU Button
To Set the Date and Time
1. Make sure the FULL AUTO/PRESET
switch is in PRESET.
2. Press the MENU button. The
recording menu will appear in the
viewfinder or on the LCD monitor.
Tele Macro
OFF
Gain Up
AGC
Color Filter
NOR.
Tape Length
T20
Title
Date/Time
Sub Menu
4 4
3 3
3. Press
or
to highlight Date/Time.
6 6
4. Press
to display the date and time
screen.
JAN 1.00
AM 12:01
Set
Cancel
4 4
Button
PROG.AE/
+
EFFECT
MENU
FAR
NEAR
_
FADE/
WIPE
3 3
Button
5. Press
6. Press
7. Repeat steps 5 and 6 to set the year,
8. Press
9. Press the MENU button. The
FULL AUTO/
PRESET Switch
6 6
Button
4 4
3 3
or
4 4
to enter the correct
month. Press
to go forward or
to go back.
6 6
to start the day flashing.
hour (including AM and PM), and
minutes.
Note: If you want to return the date and
time to the previous setting, press
to highlight Cancel and press MENU.
4 4
3 3
or
to highlight Set.
camcorder's internal clock will start
and you will return to the recording
menu.
Notes: Press MENU twice to start the
clock and remove all the menus from the
viewfinder.
If you enter an invalid date, Input Error
appears in the viewfinder. Press
5 5
or
and enter the correct day.
3 3
6 6
5 5
or
4 4
3 3
6 6
,
,
,
49
Advertisement
Table of Contents
