Attach The Adapter/Charger; Adjust The Handstrap, Remove; It To The Handstrap - RCA CC4391 User Manual

2. Attach the adapter/charger.
ToAC 120V,
50/60 Hz
o
Adapter/
Charger
DC IN 9.6V
Jack
Since the battery must be charged
before it can be used the first time,
attach the adapter/charger to the
camcorder.
1. Attach one end of the adapter/
charger's DC cable to the DC
OUTPUT jack on the side of the
adapter/charger.
2. Attach the other end of the cable
to the DCIN9.6Vjack on the
camcorder.
3. Plug the adapter/charger's plug
into an operating outlet.
4. Details are on page 14.
Adjust the handstrap, remove lens cap, and attach
it to the handstrap. .... :
Cap on
Handstrap
Lp
1. Open the handstrap, insert your
hand, and adjust the handstrap to
fit your hand.
2. Remove the lens cap and attach it
to the handstrap as shown.