Electrical System; Hydraulic System; Cutting Units - Jacobsen Tri King 1900 Series Dealer's Manual

Mower _________________________
Check:
❏
Wheel lug torque 65 - 85 ft. lb. (88 - 115 N.m)
❏
Tire pressure should be:
❏
Front 10 - 12 psi (69 - 83 kPa)
❏
Rear 8 - 10 psi (55 - 69 kPa)
❏
ROPS mounting hardware 57 ft. lbs (77 N.m)
❏
Steering nut torque 30 - 40 ft. lb. (41 - 54 N.m)
❏
Traction pedal stop adjustment
❏
Traction does not creep with pedal in neutral
❏
Parking brake adjustment
❏
Operation of all switches
❏
Function of lift-lower pedal
Engine _________________________
Check:
❏
Engine oil level
❏
Engine coolant level
❏
Air cleaner element and connections
❏
Belt adjustment

Cutting Units ___________________

Check:
❏
All hardware securely fastened
❏
Reel end play, there should be none
❏
Front roller bearing adjustment
❏
Rear Unit lift stop orientaition, and lift adjustment
❏
Adjust reel to bedknife,.001" to .003" (.025 - .08 mm)
❏
Adjust cutting height to customers' requirements
❏
Adjust down pressure springs
Support ___________________________________________________________
If you encounter any problems while setting up this
mower, contact contact the Jacobsen Customer Care
department.
Problem Description
_______________________________________________________________________________________
_______________________________________________________________________________________
_______________________________________________________________________________________
Distributor _____________________________________________
Customer _____________________________________________
Pre-Delivery Checklist
Product No. 67043 - Tri-King 1900 Series

Electrical System _______________

Check:
❏
Operator backup system (Section 4.14)
❏
Reel/3WD switch
❏
Neutral start switch
❏
Parking brake switch
❏
Seat switch
❏
Backlap Switch
❏
Panel gauges and warning lights
❏
Mower Limit switch
❏
For pinched or rubbing wires

Hydraulic System _______________

Check:
❏
Hydraulic oil level
❏
For pinched or rubbing hoses
❏
For twisted or crimped hoses
❏
For oil leaks
❏
Pump drive belt adjustment
❏
Reel motor backlap nuts are set to full forward
Miscellaneous __________________
❏
Check for loose or missing hardware
❏
All lubrication points
❏
Examine paint finish; touch up where necessary
❏
Check decals. In place and legible
❏
Make sure Safety & Operation Manual and Parts &
Maintenance Manual are in the pouch
Jacobsen,
A Textron Comany
11108 Quality Drive
Charlotte, NC 28273
800-848-1636
http://www.Jacobsen.com
Inspected ______________________________
Date _________________________________