Table of Contents
Advertisement
Mute
Note: Use the Mute button in one of the following ways.
If your voice terminal has the Speakerphone feature, use the Mute button to turn off
the microphone associated with the built-in speakerphone or the handset.
If your voice terminal has the Speaker (listen-only) function, the Mute button affects
only the handset.
This feature has no effect on an external speakerphone.
To prevent the other party
from hearing you
Priority Calling
To place a priority call
(3-burst ring)
To change a regular call
into a priority call (when
you hear a call waiting
ringback tone)
1
Press [
]
Mute
Red light goes on and other party cannot hear
you
2
When you are ready to resume conversation with
the other party, press [
Red light goes off and other party can hear you
again
Note: The Mute feature turns off automatically
when you hang up, or switch from the
speakerphone to the handset or from the handset to
the speakerphone.
1
Press [
]
Priority
or Dial Priority Calling code
Dial the extension
2
Note: If your call is not answered and you wish to
redirect it to coverage, press [
is ringing.
1
Press [
]
Priority
2
Wait for called party to answer
Note: If you still receive a call waiting ringback
tone, wait a few minutes and try again.
] again
Mute
] while call
Go to Cvr
[dial tone]
18
Advertisement
Table of Contents
