Table of Contents
Advertisement
To end a call (while
handset is on-hook and
only speaker is active)
To end a call (while hand
set and speaker are active)
Speakerphone
Note: If you are uncertain whether your voice terminal is set for the Speaker (listen
only) feature or the Speakerphone (listen and talk) feature, check with your System
Manager.
Use the following procedures if your voice terminal is set for the Speakerphone (speak
and listen) feature.
To place/answer a call
without lifting the
handset, or to use
speakerphone with any
feature
1
Press [
Speaker
1
Hang up handset
The speaker automatically turns off
1
Press [
Speaker
Green light next to [
Place or answer call, or access selected feature
2
3
Adjust speaker volume if necessary
To raise the volume, press the right half of the
Volume control button labeled [
to lower the volume, press the left half of the
Volume control button labeled [
If you have a display, it shows
[ SPEAKER L>>>> H ]
(There are 8 possible volume settings. On the
display, 1 arrow is the lowest setting, and 8
arrows is the highest setting)
Note: The Volume control button does not affect
an external speakerphone.
]
]
] goes on
Speaker
];
]
22
Advertisement
Table of Contents
