Preparation For Using Your New Tv; Selecting A Location For The Tv; Learning About Your Tv - Hisense HSLC5533HDI Instruction Manual

Selecting a location for the TV

1. Place the TV on a sturdy platform (away from direct sunlight for optimal viewing).
2. Place the TV far enough from the walls to allow proper ventilation. Inadequate ventilation
may cause overheating which may damage the TV.(150mm minimum recommended
distance around covered enclosure)
Note: Please contact retail dealer for wall mounting.

Learning about your TV

You can operate your TV by using the buttons on the front panel or on the remote control. The terminals on
the backside provide all the connections you will need to connect other equipment to your TV.
NO. Component
1 POWER Switch
2 POWER Indicator
3 Remote sensor
4 (power standby ) button Press to turn your TV on or off (standby mode).
5 CH button
6 CH button
7 VOL button
8 VOL button
9 SOURCE button
10 MENU button
(NOTE: POWER Button switch location on bottom of front cabinet.)
Component Description
Press to turn the main power ON or OFF.
Red indicates standby mode. Blue shows that the unit is on.
There will be no light when the power switch is in the off position.
Receives signals from the remote control. Do not block.
Press to change the channel up.
Press to change the channel down.
Press to decrease the volume.
Press to increase the volume.
Press to select the signal source for your TV.
Press to activate the on-screen display (OSD).
7