Operation Instruction - Walkera Runner 250 PRO Quick Start Manual

9.0 Operation Instruction

Please unlock the motor before start flying, then take off in manual mode(push up the throttle).
GPS hold mode
MIX
MIX switch
to "1" position
Attention:
1) Make sure that the received GPS signal (RIGHT red LED light blinks).
2) In the GPS mode, there are Altitude hold, fixed point, brake function, the flight speed is slower (≤5m/s).
3) If the GPS signal is poor or no signal, can only be Altitude hold, but not fixed point.
4) Switch to manual mode can not be fixed point.
Circle flight
Aircraft in
GPS hold mode
Attention:
1) Make sure that the received GPS signal (RIGHT red LED light blinks).
2) The aircraft is under quiescent state when it enters auto-circling. The circling function can only work after you set circle speed
toggling aileron stick left or right
and direction by
Dial to the left,
Clockwise circles
Speed: The larger volatility toggling and longer holding time,
the faster circling. The slower the contrary.
Dial elevator stick up or down
3)
(5m-50m radius changeable, Default is 5m)
Dial up, Circle radius turns small
Dial down, Circle radius turns large
Throttle stick
return neutral
FMOD(FMD) switch
to "2" position
Dial to the right,
Counterclockwise circles.
to change circle radius
(-5m/s to +5m/s speed changeable, Default is 0m/s).
-10-
Quick Start Guide
Ground