Color Enhancement Light - RCA CC632 User Manual

Color Enhancement Light

The color enhancement light helps create brighter, sharper pictures.
Light
To Use the Color Enhancement Light
1. Attach the rechargeable battery or
AC adapter/charger to power the
camcorder.
2. Press and hold the small button on
POWER and place it in CAMERA.
3. Select a position for the LIGHT
AUTO/OFF/ON switch.
• Place in AUTO to have the light
automatically turn on when the
camcorder is aimed at a dark object
and turn off when aimed at a bright
object.
Note: A cassette must be inserted for
AUTO to operate.
• Place in ON to have the light turn on
whenever POWER is in CAMERA.
• Place in OFF to turn off the light.
If the camcorder is left in record pause
for more than five minutes, the power
and light automatically turn off. Press
REC/PAUSE to turn camcorder back
on.
48
LIGHT AUTO/OFF/ON
Notes: Turn on the light only when you
need it. The power consumption of the
light is approximately two-thirds that of the
camcorder. When the light is on, the
operation time of the rechargeable battery
is reduced.
Avoid bumping or shaking the light when
in use. The light's bulb is sensitive when
hot and may burn out.
Do not allow water to drop on the light
when in operation.
Dangers: During operation and after
using the light, the front surface and
bulb of the light will be very hot. To
avoid burns, do not touch them.
To prevent overheating, do not block
or cover the ventilation holes on the
color enhancement light.
Never use the color enhancement light
in the vicinity of explosives or highly
flammable materials.