Using An Optional Tripod - RCA CC632 User Manual

Optional Accessories

Using an Optional Tripod

Mounting the camcorder on a tripod, such as AC031 or AC040, will keep the
camcorder steady and produce excellent video results.
Caution: Before using a tripod, make sure it is stable enough to hold the camcorder
without falling over. Do not transport the camcorder attached to the tripod.
When attaching your camcorder to a tripod, be careful not to force the tripod screw
into the camcorder's tripod mounting hole.
The tripod screw should not protrude into the camcorder more than approximately
three-eighth (3/8) inch. Forcing the screw could damage the mounting hole on the
bottom of the camcorder.
All specifications and descriptions of accessories are subject to change without notice.
56
AC031 Deluxe Tripod
This tripod's fluid effect head provides
smooth camera pan and tilt. Its quick-
release mount makes it easy to attach or
remove the camcorder. The grooved,
tubular 3-section leg design folds down
to 24" when not in use and weighs only
4-1/4 lbs. Rubber feet allow for sure
footing and the built-in retractable leg
spikes eliminate the need for removing
the feet.
AC040 Heavy Duty Tripod
This high-end tripod is equipped with
many professional features that enable
you to produce professional results. The
spring-flow head system combines both
fluid and spring action for smooth
"panning" and tilt action. It features
heavy-duty 30 mm "D-channel" styled
legs, oversized quick-release pad, click
stop tilt adjustment, pan-drag tension
adjustment, tilt-lever lock, transferable
handle, bubble level, adjustable elevator
friction tube, non-skid rubber feet with
retractable spikes and quick-release leg
lever locks.