Table of Contents
Advertisement
6
Technical Data
Functional dimensions for the Adjustable Height Table
Frame Kit are shown in Figure 1 below.
The minimum height is nominal since the position of
the height adjustment studs and thickness of the table
top will effect this dimension.
The table frame is constructed of 6063 T6 aluminum
profile. It is clear anodized to give a professional
finished appearance.
The Adjustable Height Table Frame Kit is powered by
two 110 VAC, 60 Hz motors. The telescoping actuators
have a maximum adjustment range of 500 mm, and will
support a maximum load of 400 lb (181.5 kg).
Figure 1
Table Top Max. 1400mm
Table Top Min. 1000mm
Frame 990mm
595mm
Application and Function
The Adjustable Height Table Frame Kit is used in
assembly operations where ergonomic considerations
dictate the need for height adjustability.
Height adjustment is accomplished with simple push-
button up/down control supplied with the unit. 110
VAC motors inside the telescoping actuators supply
the power for the height adjustment. The two motors
are synchronized electronically by a control module
also supplied with the unit.
15mm
555mm
500 Nm
Maximum
Moment
595mm
Advertisement
Table of Contents
