10
RemoteView components
V
CAUTION!
Observe the safety instructions in the
10.1
Installing the chipDISK
Ê Open the server as described in the
Figure 47: Installing the chipDISK
Ê Connect the chipDISK to the plug-in location on the system board.
V
CAUTION
Note the coding of the chipDISK and plug-in location.
Ê Close the server, connect it to the power outlet, and switch it on as described
in the
chapter „Completion" on page
RX300 S2
chapter „Safety notes" on page
chapter „Preparation" on page
107.
Options Guide
15.
21.
71