Fujitsu PRIMERGY RX300 S2 Options Manual page 44

Installing the ROMB upgrade kit
Figure 23: Installing the iButton and the Cache module
Ê Install the iButton on the system board (1).
Ê Press the holders on either side of the mounting location outward.
Ê Insert the cache module.
Ê Press the cache module downward until the holders on either side of the
mounting location are engaged.
Ê Close the server, connect it to the power outlet, and switch it on as described
in the chapter „Completion" on page
I
Information on the configuration is provided in the Technical Manual for
the system board.
44
ROMB (RAID on Motherboard)
107.
Options Guide
1
RX300 S2