Fujitsu PRIMERGY RX300 S2 Options Manual page 100

Installing 2nd SCSI backplane
Figure 83: Cabling the second SCSI backplane
2
Ê Connect the I
SCSI backplane.
I
Do not insert the SCSI signal cable.
Ê Connect the SCSI cable to (4) and (5) of the system board.
Ê Reinstall the fan box and the fan box air duct.
Ê Reinstall the drives.
Ê Close the server, connect it to the power outlet, and switch it on as described
in the chapter „Completion" on page
100
1
C cable (1), the power cable (2) and the SCSI-cable (3) to the
Options Guide
Converting from 1- to 2-channel version
2 3
5
107.
4
RX300 S2