Pci Slots - Fujitsu PRIMERGY RX300 S2 Options Manual

Hide thumbs Also See for PRIMERGY RX300 S2:
Table of Contents

Advertisement

9

PCI slots

V
CAUTION!
Observe the safety instructions in the
Standard configuration
The system board offers five PCI slots. Slots 1-3 are non-hot-plug PCI slots . If
two or three slots are occupied, the bus speed is 100 MHz, but, if only slot 3 is
occupied IOOP™ rules allow this slot to operate at 133 MHz.
I
The PCI slot 4 and 5 are hot-plug slots, that can be equipped with hot-
plug RAID controllers. You will find the description of the hot-plug slots in
the users manual.
Optional configuration with riser card
Three standard slots are available with a riser card: 1 x PCI-X 64-bit/100 MHz,
long, standard height; 2 x PCI-X 64-bit/100 MHz, short, standard height.
RX300 S2
chapter „Safety notes" on page
Options Guide
15.
63

Advertisement

Table of Contents
loading

Table of Contents