Table of Contents
Advertisement
Modules with electrostatic-sensitive components
Systems and components that might be damaged by electrostatic discharge
(ESD) are marked with the following label:
Figure 1: ESD label
When you handle components fitted with ESDs, you must observe the following
points under all circumstances:
Remove the power plug(s) from the power socket(s) before inserting or
removing components containing ESDs.
You must always discharge yourself of static charges (e.g. by touching a
grounded object) before working.
The equipment and tools you use must be free of static charges.
Only touch the components at the positions highlighted in green (touch
points).
Do not touch any exposed pins or conductors on a component.
Use a grounding cable designed for this purpose to connect yourself to the
system unit as you install components.
Place all components on a static-safe base.
I
You will find a detailed description for handling ESD components in the
relevant European or international standards (DIN EN 61340-5-1,
ANSI/ESD S20.20).
20
Options Guide
Safety notes
RX300 S2
Advertisement
Table of Contents
