Transmitter Troubleshooting; Cell Tx Setup - Nokia 2255 Manual

2255 (RM-97)
RF Description and Troubleshooting

Transmitter Troubleshooting

CELL Tx Setup

Use the following procedures to prepare for CELL Tx troubleshooting using Phoenix.
1. Connect RF test connector to a call box.
2. Connect the phone to a PC via the bottom connector, and connect a power
supply.
3. Open the Troubleshooting menu, and click Phone Control.
The Phone Control dialog box appears.
4. On the Phone Control dialog box, click the LOCAL button in the Phone State
area to put the phone into Local Mode.
5. Open the Troubleshooting menu, point to RF, and click CDMA Control. The RF
Main Mode dialog box appears.
6. Select the following values on the RF Main Mode dialog box:
Band = Cell (CDMA)
•
Channel = 384
•
Mode = Rx/Tx
•
Page 8
Figure 5: Phone Control dialog box
©2005 Nokia Corporation
Nokia Customer Care
Company Confidential ISSUE 1 10/2005