Nokia Customer Care
Turning on the Rx Path
Use the following steps to turn on the Rx path using Phoenix.
1. Turn on Receiver Only in CDMA mode.
2. On the Phone Control dialog box, click the LOCAL button in the Phone State
area to put the phone into Local Mode.
3. Click Execute.
4. On the RF Main Mode dialog box select the following values:
Band = Cell (CDMA)
•
Channel = 384
•
Mode = Rx/Tx
•
5. Click Set.
Note: Be sure that the "RF Main Mode set successfully" message appears in the status bar
ISSUE 1 10/2005
Figure 15: Phone Control dialog box
Figure 16: RF Main Mode dialog box for Cell Mode
©2005 Nokia Corporation
RF Description and Troubleshooting
Company Confidential
2255 (RM-97)
Page 19