Nokia 2255 Manual page 36

2255 (RM-97)
RF Description and Troubleshooting
Use the following steps to set up a CW signal:
1. Open the Phone Control dialog box.
Figure 32: Phone Control dialog box for VCTCXO troubleshooting
2. Click the LOCAL button in the Phone State area to put the phone into Local
Mode.
3. Select the following values on the RF Main Mode dialog box:
Band = Cell (CDMA)
•
Channel = 384
•
Mode = Rx/Tx
•
Figure 33: RF Main Mode dialog box for VCTCXO troubleshooting
4. Do not use CDMA control to turn on Rho.
5. Open the BB General I/O dialog box to set the CW signal.
Page 36
©2005 Nokia Corporation
Nokia Customer Care
Company Confidential ISSUE 1 10/2005