Geokon 8025 Instruction Manual page 25

Temperature Zero Readings & Thermal Factors:
N : T
OTE EMPERATURE
. T
CORRECTION EMPERATURE CORRECTION MAY BE USED TO COMPENSATE FOR CHANGES IN
'
A GAGE S READINGS DUE TO TEMPERATURE CHANGE
VARIES ON DIFFERENT MODELS OF GAGES AND TEMPERATURE CORRECTION IS OFTEN NOT
. D
REQUIRED EPENDING ON THE GAGE MODEL TEMPERATURE CORRECTION MAY NOT BE
AVAILABLE AND SOME GAGE MODELS REQUIRE A DIFFERENT FORMULA TO COMPENSATE
T
EMPERATURE CORRECTION IS COMMENTED OUT IN THE MAIN PROGRAM FILE BY DEFAULT
Default values for Temperature Zero Readings and Thermal Factors are 0. Temperature
Zero Readings and Thermal Factors can be added if the user requires the Datalogger to
use temperature compensation.
Navigate to the Main(.CR8/.CR1) file C:\Campbellsci\CRBasicEditor. Open the
Main(.CR8/.CR1) file with notepad and uncomment the line specified in the code for all
model gages that temperature correction is required.
Output Labels:
Default Alias names correspond with the Direct or Multiplexer channel for each specific
gage. Alias names get displayed in the Header of the Data file, and can be modified by
the user.
W : A N
ARNINGS LIAS
MUST ONLY CONTAIN ALPHANUMERIC VALUES AND UNDERSCORES
). T
SYMBOLS HIS VALUE MUST BEGIN WITH AN ALPHA CHARACTER
Z T F
ERO AND HERMAL
AMES CANNOT BE MORE THAN
ACTORS ARE USED FOR TEMPERATURE
. T
EMPERATURE EFFECT ON READINGS
35
CHARACTERS LONG AND
19
.
.
(N
O SPACES OR
.