Modifying The Datalogger Program; Editing The Crbasic Program; E.3 M Odifying The D Atalogger P Rogram - Geokon 8025 Instruction Manual

18
E.3 Modifying the Datalogger Program
Navigate to the Include(.DLD) file on the end user's computer C:\Campbellsci\CRBasicEditor.
Optional changes to Scan Interval, Zero Readings, Gage Factors and Alias names can be made
by opening the Include(.DLD) file with Notepad. Each Datalogger configuration has a unique
Include(.DLD) file.
W : O
ARNING NLY CHANGE VALUES AFTER THE
E.3.1 Editing the CRBasic Program
Scan Interval:
The number entered in the Scan Interval section determines how often the Datalogger
will read the gages and store data. The Scan Interval is in seconds.
Zero Readings & Gage Factors:
Default values for Zero Readings are 0 and Linear Gage Factors are 1. The default
settings read in Digits for Vibrating Wire sensors and Volts for MEMS tilt sensors. Zero
Readings and Gage Factors can be added if the user requires the Datalogger to store
engineering units.
"="
.
SIGN