Appendix C. Data Storage; Input Locations; Data Storage - Geokon 8025 Instruction Manual

APPENDIX C. DATA STORAGE

C.1 Input Locations
Default explanations for the Input/Final Storage location usage in MultiLogger unless user
configured:
Input Storage #
1
2
3
4
5
6
7
8
9
10
11
47-78
C.2 Data Storage
Total Arrays of Data that can be stored per 16 Channel Multiplexer. Each array contains all Data
stored at each read interval.
1 Multiplexer Array Storage
2 Multiplexer Array Storage
3 Multiplexer Array Storage
4 Multiplexer Array Storage
5 Multiplexer Array Storage
6 Multiplexer Array Storage
Label
Logger ID
Year
JulianDay
Time-HHMM
Seconds
DecimlDay
ElapsdHr
ElapsdMin
ElapsdSec
Battery
PanelTemp
Mx1
Total Arrays
20,700
12,257
8,686
6,701
5,457
4,593
Explanation
Datalogger ID 1-9999
Year when last readings taken
Julian Day (1-365) when last readings taken
Time (24 hour) when last readings taken
Seconds when last readings taken
Decimal Day when last readings taken
Elapsed Hours from "Start"
(if "Log" selected as "Scan Interval")
Elapsed Minutes from "Start"
(if "Log" selected as "Scan Interval")
Elapsed Seconds from "Start"
(if "Log" selected as "Scan Interval")
Datalogger battery voltage
Datalogger panel temperature (°C)
Readings from Gages on Mux #1
9