2-13 Boot To Mower Deck Installation
Continued
Step 9: Locate the aluminum boot P#(E0020) and the
boot plate assembly P#(A1121). Secure the boot plate
assembly to the boot as shown in Figure 2-13k, using (2)
3/8"-16 x 1" carriage bolts P#(K1182) and (2) 3/8"-16
nylon flange locknuts P#(K2038).
NOTE: Insert the carriage bolts from inside of the boot
so that the threads are on top of the boot as shown in
Figure 2-13k. This will prevent grass clipping from
collecting on the bolt threads. DO NOT TIGHTEN THE
HARDWARE.
Figure 2-13k
Step 10: Lift the discharge chute on the mower deck and
position the boot assembly as shown in Figure 2-13l.
Align the bushings on the boot plate assembly with the
bushings on the deck mount plate.
Figure 2-13l
Aluminum
Boot
Boot Plate
Assembly
21
Nuts Fasten
From The Top
Align The Bushing On The
Deck Mount Plate With The
Bushings On The Boot Plate Assembly