Pairing The Keypad - Raymarine RMK-10 Installation Instructions Manual

6.2 Pairing the keypad

Each keypad can be paired with multiple MFDs and
multiple keypads can be connected to the same
system.
With the keypad connected to the MFD:
1. Select External Keypad from the External
Devices menu: homescreen > Set-up > System
Settings > External Devices > External
Keypad.
2. Select Pair Keypad.
3. Press any button on the external keypad.
4. From the pop-up message select the orientation
of the keypad.
Either landscape or portrait orientations are
available.
The keypad is now paired.
Switching the active pane or display
using the keypad
The Active button is used to switch the active pane
on a multi application page and / or to switch the
active display.
With multiple displays connected and / or a multiple
application page displayed:
Cycle sequence
1. Press the Active button to enter switch mode.
2. Use the Rotary control to cycle through the
available panes and / or displays.
The keypad will cycle through displays in the
order in which they were paired. On multi
application pages the + and - buttons can be
used to switch the active application between full
and splitscreen.
3. Press the Back button or the Active button to
exit switch mode.
Unpairing the keypad
The keypad can be unpaired from an individual
display.
1. Select External Keypad from the External
Devices menu: homescreen > Set-up > System
Settings > External Devices > External
Keypad.
Operation
2. Select Clear Pairings.
3. Select Yes to unpair the keypad with the display.
Unpairing from all displays
The keypad can be unpaired from all displays
following the steps below.
1. Press and hold the Range In and Range Out
buttons simultaneously for approximately 6
seconds.
The keypad will sound a triple beep to signify it is
now unpaired.
Determining the active display
You can determine which display is currently active.
1. Press the Active button.
The Active pop-up is displayed on the screen or
pane that is active.
2. Press the Active button again to close the Active
pop-up.
The active display remains the same.
27