Raynet To Rj45 Adapter Cables - Raymarine RMK-10 Installation Instructions Manual

Hide thumbs Also See for RMK-10:
Table of Contents

Advertisement

RayNet to RJ45 adapter cables

Description
1
Adapter cable with a RayNet (female)
socket on one end, and a waterproof
(female) socket on the other end
accepting the following cables with an
RJ45 SeaTalk
hs
waterproof locking
(male) plug:
• A62245 (1.5 m).
• A62246 (15 m).
2
Adapter cable with a RayNet (female)
socket on one end, and a waterproof
(female) RJ45 socket on the other
end, along with a locking gland for a
watertight fit.
3
Adapter cable with a RayNet (male)
plug on one end, and an RJ45
SeaTalk
hs
waterproof (male) plug on
the other end.
4
Adapter cable with a RayNet (female)
socket on one end, and an RJ45
SeaTalk
hs
waterproof (male) plug on
the other end.
5
Adapter cable with a RayNet (female)
socket on one end, and an RJ45
SeaTalk
hs
(female) socket on the
other end.
Typical use
A typical use for this adapter cable is to connect a DSM300
sonar module to a LightHouse MFD, using all-waterproof
cable connections. This adapter cable will also accept the
following RJ45 SeaTalk
hs
cables, although the RJ45 plug
that connects at the equipment end (e.g. DSM300) will NOT
be waterproof:
• E55049 (1.5 m).
• E55050 (5 m).
• E55051 (10 m).
• A62135 (15 m).
• E55052 (20 m).
Directly connect a Raymarine radar scanner with an RJ45
SeaTalk
hs
(male) cable to a RayNet network switch (e.g.
HS5) or LightHouse MFD.
Connect a legacy G-Series GPM-400, C-Series Widescreen
or E-Series Widescreen MFD to a Raymarine radar scanner
supplied with a RayNet power / data cable.
Connect a legacy G-Series GPM-400, C-Series Widescreen
or E-Series Widescreen MFD to a RayNet network switch
(e.g. the HS5).
Connect a LightHouse MFD to a legacy SR6 switch /
weather receiver or a legacy 8–port SeaTalk
switch. Another common use for the cable is in conjunction
with a crossover coupler (E55060 or R32142) to connect
Raymarine products with an RJ45 connection (e.g. radar
scanner, thermal camera or DSM300) to a LightHouse MFD
or RayNet network switch (e.g. the HS5).
Discover other marine electronics & navigation on our website.
Quantity
1
1
1
1
1
hs
network

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents