Grilling; Roasting/Baking - George Foreman CYCLO CHEF GFAF5000 Instructions Manual

GRILLING

The grilling function is perfect for grilling, crisping or browning foods. Use as you would a
conventional grill by bringing the food close to the heat using the rack.
1. Unplug your Cyclo Chef Multi Air Cooker.
2. Place the rack in the bowl. Use it in the high position.
3. Plug in your Cyclo Chef Multi Air Cooker. The unit will beep and the display will light up
briefly.
4. Tap the power button ( ).
5. The display will light up (see DISPLAY) and the air fry button (
default selected program.
6. Tap the grill button (
7. The display will alternate between showing the default grill temperature and the
program run time. You can change either of these settings (see PROGRAM GUIDE).
8. Change the settings as desired or accept the defaults.
9. Tap the power button ( ) to start the program.
10. Once the program has finished, the display will go out (except the power button)
and the fan will operate for 20 seconds. After 20 seconds, your Cyclo Chef Multi Air
Cooker will beep 5 times and then switch off.
11. Open the lid. Beware of any escaping steam and hot air.
12. We recommend you wear oven gloves.
• The program can be paused at any time by opening the lid. Close the lid to resume the
program.
• To stop the program, press the power button ( ). The program will stop and the fan
will continue to run for 20 seconds. Any program settings will be lost.

ROASTING/BAKING

1. Unplug your Cyclo Chef Multi Air Cooker.
2. Food can also be baked directly in the bowl (e.g. cakes).
3. The food can be placed directly onto the rack or into a suitably sized oven-proof
container.
4. Plug in your Cyclo Chef Multi Air Cooker. The unit will beep and the display will light up
briefly.
5. Tap the power button ( ).
6. The display will light up (see DISPLAY) and the air fry button (
default selected program.
7. Tap the roast/bake button (
8. The display will alternate between showing the default roasting/baking temperature
and the program run time. You can change either of these settings (see PROGRAM
GUIDE).
9. Change the settings as desired or accept the defaults.
10. Tap the power button ( ) to start the program.
) to select the grill program.
) to select the roast/bake program.
7
) will flash as the
) will flash as the