Ap1014I Overview - Meru Networks AP1014i Installation Manual

AP1014i Overview

AP1014i Overview
The AP1014i is designed for use with small-scale wireless environments and telecommuter applica-
tions. When VPN access is configured in the corporate System Director interface, users can deploy the
AP1014i remotely and have a quick and secure wireless connection to the corporate network.
Deployments that expect high-user-density or are intended to support voice or video streaming are not
recommended for the AP1014i. The AP supports a maximum of 10 simultaneous wireless clients.
Note:
directly to the corporate network and configured in the same manner as any other
AP if remote use is not required.
See Figure 5 for an overview of the AP1014i's access ports.
Figure 5: AP1014i Ports
The AP1014i utilizes a single 2x2 802.11b/g/n wireless radio with an internal antenna.
Note:
Warning!
2 Meru Access Point Installation Guide
Although the AP1014i was designed for remote VPN use, it can be connected
The WPS button on the AP1014i is not currently supported.
The Reset button on the AP1014i will erase all configured settings on the
device, including VPN communication configuration.
© 2012 Meru Networks, Inc.