Advertisement
Chapter 18 , Spare Parts
Servo Block
[H0392-S]
- 8 x Servo Block.
- 8 x Servo Spacer.
- 8 x Cap Screws M2.5x10.
Delrin Dampener
[H0425-S]
- 2 x CNC Delrin Dampener.
- 4 x Steel Shim Ø8xØ14x0,2.
- 2 x O-ring Damperner.
SwashPlate
[H0475-S]
- 1 x Swashplte Assembly.
- 1 x Uniball M3x4Ø5H18.
- 6 x Uniball M3x4Ø5H3.
Red/Carbon Canopy
(Optional Scheme)
[H0928-S]
- 1 x Red/Carbon Canopy.
- 2 x Canopy Groummet.
- 1 x Canopy Mouse.
- 1 x Edge Protection.
Yellow/Carbon Canopy
(Optional Scheme)
[H9038-S]
- 1 x Yellow/Carbon Canopy.
- 2 x Canopy Groummet.
- 1 x Canopy Mouse.
- 1 x Edge Protection.
Page 34
Tail Servo Mount
[H0393-S]
- 1 x Tail Servo Mount.
- 2 x Finishing Washer.
- 2 x Cap Screws M2.5x8mm.
Spindle
[H0471-S]
- 2 x Steel Spindle Shaft.
- 2 x Steel Pin 4mm.
- 4 x Head Cap Screw M2.5x5.
- 2 x Button Screw M6x10.
- 2 x Washer Ø8xØ10x0.5.
MAIN BLADES G570 WHITE
(3BL540)
- 3 x Main Blades 540 White.
Carbon Road Support
[H0394-S]
- 1 x Carbon Road Support A.
- 1 x Carbon Road Support B.
- 1 x Socket Head Cap
Screws M2.5x12mm.
Center Hub
[H0473-S]
- 1 x Center Hub.
- 1 x Head Cap Screw M3x12.
- 1 x Head Cap Screw M3x20.
- 1 x Nylon Nut M3.
Red/Carbon Tail Boom
(Optional Scheme)
[H9033-S]
- 1 x Red/Carbon Tail Boom.
- 2 x Nylon Screw M8x14mm.
- 2 x Double Side Tape ( HA022).
- 2 x Washer
Yellow/Carbon Tail Boom
(Optional Scheme)
[H9043-S]
- 1 x Yellow/Carbon Tail Boom.
- 2 x Nylon Screw M8x14mm.
- 2 x Double Side Tape ( HA022).
- 2 x Washer
Anti-Rotation Guide
[H0401-S]
- 1 x Anti-Rotation Guide.
- 1 x Finishing Washer M2.5.
- 1 x Cap Screws M2.5x8mm.
Radius Arm HPS3
[H0474-S]
- 2 x Aluminum Radius Arm.
- 1 x Plastic Radius Arm.
- 1 x Hexagon Spacer.
- 2 x Brass Spacer Arm.
- 2 x Head Cap Screw M3x12.
- 2 x Head Cap Screw M2.5x8.
- 2 x Flanged Bearing Ø2.5xØ6x2.5.
- 4 x Flanged Bearing Ø3xØ7x3.
TAIL BLADES 104 WHITE
(BW5104)
- 2 x Tail Blades 104 White.
- 2 x Locking Element Tail.
- 6 x Metric Hex Nylon Nut M3.
- 2 x Double Side Tape (HA028).
3.1x
12x1.8mm.
- 2 x Socket Head Cap Screw M3x10mm.
- 2 x Locking Element Tail.
- 6 x Metric Hex Nylon Nut M3.
- 2 x Double Side Tape (HA028).
3.1x
12x1.8mm.
- 2 x Socket Head Cap Screw M3x10mm.
CNC Derlin Main Gear
[H0423-S]
- 1 x CNC Derlin Main Gear.
Advertisement
