Vision Fitness E3200 Frame 9 Service Manual page 7

Mode Function
Eng 1 Display Test
Eng 2 Machine Test
Eng 3 Software Version
Default Time
Eng 4 Setting ( from 0 to
99 min)
Default Level
Setting (From L1
Eng 5
to L16)
Product Selection
& Model
Eng 6
Configuration
Additional Switch Function
(Fig.A)
(Fig C)
START LED on (Fig. A)
START LED off (Fig. B)
START START "▲"/ "▼"
Hold "START" 3 sec
START Heart rate, Accumulated Time/Distance to be
presented on the console.
Hold "ENTER" 2 sec
Hold "START" 3 sec back to "Engineering Menu"
Software version is presented.
Hold "START" 3 sec back to "Engineering Menu"
Press UP▲ to increase ,
Press DOWN ▼ to decrease,
Hold ENTER 2 sec to save new setting,
Press START back to "Engineering Menu".
Press UP▲ to increase ,
Press DOWN ▼ to decrease,
Hold ENTER 2 sec to save new setting,
Press START back to "Engineering Menu".
Press the UP▲ or DOWN▼ keys to select EP or Bike.
Press the ENTER key to save the change to the parameter.
Press the UP▲ or DOWN▼ keys to select model number，
Press the ENTER key to save the change. (Fig. C)
Switch "SW2" at the back of PCB to adjust Mile and KM.
Adjust it up to be Mile
Adjust it down to be KM
Description
display on window
back to "Engineering Menu"
Delete the accumulated data.
(Fig. D)
(Fig.B)
(Fig D)
7